Using the 1D Barcode Scanner
The Linea Pro 5 1D model uses a scan engine that supports one-dimensional (1D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size.
Scanning 1D Barcodes
To scan a 1D barcode fist activate the Linea Pro 5 by pressing the scan button. Then position the scan head as close to the barcode label as possible so that the scan line crosses both ends of the barcode as shown in the figure below.
Slowly pull back the unit increasing the distance between the barcode and scan head until the barcode has been read by the scanner.